# hoomd.write¶

Overview

 Table A delimiter separated value file backend for a Logger. CustomWriter Writer wrapper for hoomd.custom.Action objects. GSD Write simulation trajectories in the GSD format.

Details

class hoomd.write.Table(trigger, logger, output=stdout, header_sep='.', delimiter=' ', pretty=True, max_precision=10, max_header_len=None)

A delimiter separated value file backend for a Logger.

This can serve as a way to output scalar simulation data to standard out. However, this is useable to store simulation scalar data to a file as well.

Note

This only works with scalar and string quantities. If using string quantities, keep in mind that the default space delimiter will make strings with spaces in them will cause read errors if attempting to read the outputed data with a space delimited file reader.

Note

All attributes for this class are static. They cannot be set to new values once created.

Parameters
• trigger (hoomd.trigger.Trigger) – The trigger to determine when to run the Table back end.

• logger (hoomd.logging.Logger) – The logger to query for output. The ‘scalar’ categories must be set on the logger, and the ‘string’ categories is optional.

• output (file-like object , optional) – A file-like object to output the data from, defaults to standard out. The object must have write and flush methods and a mode attribute.

• header_sep (str, optional) – String to use to separate names in the logger’s namespace, defaults to ‘.’. For example, if logging the total energy of an hoomd.md.pair.LJ pair force object, the default header would be md.pair.LJ.energy (assuming that max_header_len is not set).

• delimiter (str, optional) – String used to separate elements in the space delimitated file, defaults to ‘ ‘.

• pretty (bool, optional) – Flags whether to attempt to make output prettier and easier to read, defaults to True. To make the ouput easier to read, the output will compromise on outputted precision for improved readability. In many cases, though the precision will still be high with pretty set to True.

• max_precision (int, optional) – If pretty is not set, then this controls the maximum precision to use when outputing numerical values, defaults to 10.

• max_header_len (int, optional) – If not None (the default), limit the outputted header names to length max_header_len. When not None, names are grabbed from the most specific to the least. For example, if set to 7 the namespace ‘hoomd.md.pair.LJ.energy’ would be set to ‘energy’. Note that at least the most specific part of the namespace will be used regardless of this setting (e.g. if set to 5 in the previous example, ‘energy’ would still be the header).

trigger

The trigger to determine when to run the Table back end.

Type

hoomd.trigger.Trigger

logger

The logger to query for output. The ‘scalar’ categories must be set on the logger, and the ‘string’ categories is optional.

Type

hoomd.logging.Logger

output

A file-like object to output the data from. The object must have write and flush methods and a mode attribute.

Type

file-like object

header_sep

String to use to separate names in the logger’s namespace.’. For example, if logging the total energy of an hoomd.md.pair.LJ pair force object, the default header would be md.pair.LJ.energy (assuming that max_header_len is not set).

Type

str

delimiter

String used to separate elements in the space delimitated file.

Type

str

pretty

Flags whether to attempt to make output prettier and easier to read. To make the ouput easier to read, the output will compromise on outputted precision for improved readability. In many cases, though the precision will still be high with pretty set to True.

Type

bool

max_precision

If pretty is not set, then this controls the maximum precision to use when outputing numerical values, defaults to 10.

Type

int, optional

max_header_len

Limits the outputted header names to length max_header_len when not None. Names are grabbed from the most specific to the least. For example, if set to 7 the namespace ‘hoomd.md.pair.LJ.energy’ would be set to ‘energy’. Note that at least the most specific part of the namespace will be used regardless of this setting (e.g. if set to 5 in the previous example, ‘energy’ would still be the header).

Type

int

min_column_width

The minimum allowed column width.

Type

int

write()

Write out data to self.output.

Writes a row from given hoomd.logging.Logger object data.

class hoomd.write.CustomWriter(action, trigger=1)

Writer wrapper for hoomd.custom.Action objects.

For usage see hoomd.custom.CustomOperation.

class hoomd.write.GSD(filename, trigger, filter=hoomd._hoomd.ParticleFilter, mode='ab', truncate=False, dynamic=None, log=None)

Write simulation trajectories in the GSD format.

Parameters

GSD writes a simulation snapshot to the specified file each time it triggers. GSD can store all particle, bond, angle, dihedral, improper, pair, and constraint data fields in every frame of the trajectory. GSD can write trajectories where the number of particles, number of particle types, particle types, diameter, mass, charge, or other quantities change over time. GSD can also store operation-specific state information necessary for restarting simulations and user-defined log quantities.

Valid file open modes:

mode

description

'wb'

Open the file for writing. Create the file if needed, or overwrite an existing file.

'xb'

Create a GSD file exclusively. Raise an exception when the file exists.

'ab'

Create the file if needed, or append to an existing file.

To reduce file size, GSD does not write properties that are set to defaults. When masses, orientations, angular momenta, etc… are left default for all particles, these fields will not take up any space in the file. Additionally, GSD only writes dynamic quantities to all frames. It writes non-dynamic quantities only the first frame. When reading a GSD file, the data in frame 0 is read when a quantity is missing in frame i, supplying data that is static over the entire trajectory. Set the dynamic parameter to specify dynamic attributes by category.

Specify the one or more of the following strings in dynamic to make the corresponding quantities dynamic (property is always dynamic):

• property

• particles/position

• particles/orientation (only written when values are not the default: [1,0,0,0])

• momentum

• particles/velocity

• particles/angmom (only written when values are not the default: [0,0,0,0])

• particles/image (only written when values are not the default: [0,0,0])

• attribute

• particles/N

• particles/types

• particles/typeid

• particles/mass

• particles/charge

• particles/diameter

• particles/body

• particles/moment_inertia

• topology

• bonds/*

• angles/*

• dihedrals/*

• impropers/*

• constraints/*

• pairs/*

See the GSD documentation, GSD HOOMD Schema, and GSD GitHub project for more information on GSD files.

Note

When you use filter to select a subset of the whole system, GSD will write out all of the selected particles in ascending tag order and will not write out topology.

Tip

All logged data chunks must be present in the first frame in the gsd file to provide the default value. To achieve this, set the log attribute before the operation is triggered to write the first frame in the file.

Some (or all) chunks may be omitted on later frames. You can set log to None or remove specific quantities from the logger, but do not add additional quantities after the first frame.

filename

File name to write.

Type

str

trigger

Select the timesteps to write.

Type

hoomd.trigger.Trigger

filter

Select the particles to write.

Type

hoomd.filter.ParticleFilter

mode

The file open mode.

Type

str

truncate

When True, truncate the file and write a new frame 0 each time this operation triggers.

Type

bool

dynamic

Quantity categories to save in every frame.

Type

list[str]

property log

Provide log quantities to write.

May be None.

Type

hoomd.logging.Logger

static write(state, filename, filter=hoomd._hoomd.ParticleFilter, mode='wb', log=None)

Write the given simulation state out to a GSD file.

Parameters

The valid file modes for write are 'wb' and 'xb'.